| Model | F-550 |
|---|---|
| Rated voltage | AC230V 50 / 60Hz |
| Motor voltage (Vac) | 24v |
| Input power (W) | 250 |
| Ambient temperature (℃) | -20 ~ +50 |
| Maximum door weight (kg) | 600 |
| Running speed (m / min) | ≥11 |
| Motor speed (rpm) | 3000 ± 200 |
| Maximum stroke (mm) | 350 |
| Maximum opening area (㎡) | 20 |
SAFETY REVERSAL
PICO features PSR (pressure sensitive reversal). If the gate is slowed by an external force, such as meeting an obstacle, the gate motor will slow up, and ultimately stall. Most low voltage motors monitor the power in the motor to detect the stall, but the accepted best method is to use a speed sensor on the motor shaft. The PICO's optical encoder also tells the controller the gate position for accurate deceleration points.
The manual release lever is built into the face of the motor housing. It is released by a key at the top. The lever hinges down to ground level de-clutching the motor allowing the gate to be pushed by hand. When the motor is released, a switch disables the control panel for safety reasons. This release requires only very light pressure to disconnect, suitable for people with weak hands.
CONTROLS
PICO sets come with two double button remotes. Channel 1 opens the gate fully. The other channel can optionally be set to partially open the gate for pedestrians, or to operate another device such as a garage door or gate. The full open function is also available as a hardwire input for a wired keypad on intercom.
BATTERY BACKUP
n case of a power failure, the PICO has battery charger and space for a 24V pack, so the manual release may never be required. The light duty pack will last in standby for 10 hours and operate a few times. A larger pack is available for high duty gates.
