| Model | F-700 |
|---|---|
| Rated voltage (Vac) | 220 |
| Rated frequency (Hz) | 50/60 |
| Opening time (s / 90 °) | 18 |
| Input power ( W ) | 250 |
| Current ( A ) | 1.3 |
| Maximum door weight ( kg ) | 500 |
| Single fan maximum door width ( m ) | 2 |
| Maximum stroke (mm) | 350 |
| Maximum opening area (㎡) | 20 |
SAFETY REVERSAL
Two limit switches fixed to the motor shaft stop the motor in the open and closed positions. An adjustment tool to set the cams is stored on the RETRO chasis plate. A centre stop is not required in the drive.
MANUAL RELEASE
A manual release lever is secured behind a lockable hatch on each motor body. The door can be left unlocked for clients prone to loosing keys. The lever disengages the motor with surprisingly light pressure allowing the gate to swing manually.
Swing gates are less resistant to forcing than sliding gates. An electric lock triggered from the control panel can be fitted to one leaf to lock into the ground, levels permitting. The first leaf is secured between the centre stop and the locking gate. There is a key release in the lock in case of a power failure. Electric locks take any forces on the gate away from the opener. Forces are exerted on boarded wooden gates by wind.
